Small Precision Diamond Wire Saw With Digital Control Pannel for Slicing Sample 2 inch Diameter cutting machine
HB- DWS-202 is a CE certified, small precision diamond wire saw for cutting sample 2inch diameter or square up to 50mm in thickness. It is designed to provide a very smooth cutting for almost all kinds of materials, especially for fragile crystals and TEM or IC sample by using 0.28mm diameter x 15 meter long diamond impregnated wire. It is ideal cutting tool for material research, TEM sample preparation, and IC failure analysis.
110 - 240V AC 50/60Hz, for universal power
Heavy-duty aluminum alloy structure with compact size
Precision setting at Y direction by micrometer head
single wire swing cutting with adjustable wire length from 5-15mm (broken wire still can be used)
Transparant plastic plates is included to provent Coolant splashing ( see picture left )
Stage traveling distance
Z axis: 50mm, automatically controlled by digital pannel
Y axis: 50mm, manually setting by micrometerhead
Two dimension sample stage built in: 360° degree horizontal rotating and +/-10° tilting
Traveling position accuracy
+/- 0.01 mm
Controller & Touch Screen
The saw wire moves along the Z-axis to implement cutting according to user defined program which specifying the cutting length, feed speed, back, speed, and spooler spinning speed. The feed speed is able to be set from 0.01mm/min to 20mm/min.
≤ 15 meters used for each installation
0.28mm dia x 86 meter length Diamond Wire is included for immediate use
Optional: For slicing or dicing very brittle crystal, you may order 0.12 mm dia. Diamond Wire. Note that 0.12mm dia. Diamond Wire is very thin and easy to broken, please reduce feeding rate to minimum. Please click the picture below to order spare diamond wires of different sizes.
Wire traveling speed
0- 1.5 M/S adjustable
Cutting Depth & Thickness
Max: 50 mm in diameter or square
Min. 0.1 mm
One small water recirculating pump is included for cooling diamond wire during cutting
Youmust use anti-corrosive oil or radiator water as coolant ( buy from any auto stor )
Warning: must clean machine after each cutting , espeically using tap water as coolant. Otherwise the saw may get rusted
3 Amps, Torque=1.8Nm
Saw: 414mm(L) × 500mm(W) × 750mm(H)
Controller: 340mm(L) x 290mm(W) x 170mm(H) ( (click to enlarge the picture below for detail size )
685mm(L) x 584mm(W) x 1016mm (H)
One year limited with lifetime support, not including cutting wire
The flow rate of coolent is adjustable by the valve in the blue feeding tubing. Please adjust it properly to improving cutting performance.
Please use correct cutting fluid. Don't use tap water or any other fluid would cause corrosion of machine parts.